PANTONE 072 C
PANTONE 123 C
everyday solutions
™
Est. 1992
Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
Instruction for indoor use
1. Remove all parts from packaging and check if all the parts are included and not damaged.
2. Connect the adaptor to the cable and make sure the metal wires align with the holes. Push it in
until firmly in place then screw the cable’s plastic sleeve onto the plug.
3. Attach light to the round base. Do not use excessive force or you risk damaging the light.
4. Ensure Star Shower Motion is placed on a steady, level surface.
5. Loosen the thumbscrew and adjust the angle of the Star Shower light housing so it is pointing at
your intended surface. Tighten the thumbscrew to hold angle.
Operation:
When the laser light is on, DO NOT STARE INTO THE BEAM
Star Shower light is intended to operate in temperatures from
-4°F to 95°F (-20°C to 35°C). At or below freezing temperature,
Star Shower light may take up to 10 minutes to 20 minutes to
warm up and reach its full projection strength.
On/Off on the Light:
The on/off switch is found at back of the unit (fig. 1). Press the
button to switch on, then repeatedly press the button to cycle
through modes and switch off.
Remote Control:
Working Distance: You can work the remote control from a
distance of 15-20M depending on surroundings and weather
conditions.
• Comes with a CR2052 battery already inserted. Please pull
out the plastic insulator before use.
• Red button - On/Off
• Colour Button - Change colour
• Flash Button - Change flashing mode
• Timer -Choose how long you would like the lights to stay on
and press the appropriate option. The lights will automatically
turn off after this time.
• Cancel -If you no longer want the lights to stay on for how
long you originally chose, simply press cancel and the lights will
stay on until you turn the off using the on/off button.
Battery replacement:
To replace the battery, simply push the squeeze the
battery compartment between your fingers and pull
open. Replace the battery, ensuring correct polarity is
used and reinsert the battery compartment back into the
remote control.
Fig. 1
On/Off
Change Colour
Change Flash
Mode
Auto Off Timer
Cancel Timer
Tap the On/Off button to cycle through nine mode settings
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Spinning red and green colour
Spinning red colour
Spinning green colour
Spinning red and green slow pulse
Spinning red and green medium pulse
Spinning red and green fast pulse
Static red and green colour
Static red colour
Static green colour
