PANTONE 072 C
PANTONE 123 C
2
Important Safety Information
• Please read this instruction manual carefully before use.
• Do not use the product in situations which require special attention (e.g. in traffic or when performing
skilled jobs)
• Always keep the product dry and do not expose it to extreme temperatures.
• Use the product with care and store it in a clean, dust-free environment.
• Switch the headphones off after use to conserve battery power.
• Remove the batteries if not in use for a long period of time.
• To reduce the risk of fire or electric shock, do not use the product near water and do not expose it to
rain or moisture.
• Only use DC adaptor power source as specified in this manual
• Unplug the power supply unit from the wall socket - to completely disconnect the product from the
mains during lightning storms or when unused for long periods of time.
• Ensure that the power supply unit is in a safe operating condition and easily accessible, properly
plugged into the wall socket, only operated within the permissible temperature range, not covered or
exposed to direct sunlight for longer periods of time in order to prevent heat accumulation.
• Do not operate the product near any heat sources.
Product Overview
A. HEADPHONES
1. Battery Compartment
2. Switch On/Off (Volume Control)
3. SCAN button
4. Power indicator (Lights up when on)
5. RESET button
6. Audio Jack
Front
Rear
Left
Right
B. TRANSMITTER
7. Power Indicator (Lights up when on)
8. Switch On/Off
9. DC IN
10. Audio In Jack
11. Battery Compartment (bottom)
Support Line: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
everyday solutions
™
Est. 1992
Inserting the batteries
Release the battery cover on the left side of headphones and on the base
of transmitter, insert two AAA batteries into the battery compartment with
correct polarity. Close the battery compartment.
A specified DC4. 5V adaptor (optional) can be also used as a power supply
for the transmitter. For use, please connect the adaptor to the power socket
(9) on rear of transmitter.
Wireless Headphone
• Plug one end of audio cable into audio output socket on your audio device such as a radio,
computer, MP3, TV or any device, and plug the other end into audio in jack of transmitter.
• Push the switch on rear of transmitter to the “ON” position, the indicator lights up.
• Turn on the headphones, the indicator lights up. Turn on the audio source, press “RESET” button to
get a signal. Adjust the volume to moderate level.
• To achieve the best reception, place transmitter at a higher position or spread out the audio cable
connecting to transmitter. The cable is also used as an antenna.
B
A
