Easylam EXPERT 140 C, Operating Instructions Manual

Page: 3 / 16

Further advises for installation:
Power supply:
The connection sockets have to be close to the machine.
• single-phase current 110 V - 230 V
• frequency: 50 – 60 Hz
• strength of electric current: 5 A
Location
The location to place the machine must provide enough space to work. Don’t forget that space is also
needed to insert and remove the material. Please consider the dimensions of the pictures and sheets
used.
Place
Prepare a flat location suited to the size of the machine and also consider its accessories.
Lighting
Good lighting (300 – 600 lux) is indispensable to operating and maintaining the machine safely.
Room properties:
The laminator has to be placed in a closed room and has to be protected against weather effect.
• Permissible room temperature: 18°C to 35°C.
• Humidity range permitted: 30% to 80%
Electricity connection
Check that the electrical supply corresponds with the machine performance.
With connecting to the electricity supply, the laminator must be earthed.
To connect the laminator with electric supply system:
• Interrupt the current supply.
• Connect the connection cable to a suitable plug or directly to the main (capsule rail, junctionbox, etc.).
• Turn on the electricity with main switch (10).
Test before use
Before the actual initial operation, carry out a few test runs of the different functions of the device.
- 3 -