EasyIO FG-20 Installation Manual Download Page 3

EasyIO FG-20– Installation Guide v1.3 

 

Disclaimer 
 

Confidentiality Notice 

The information contained in this document is confidential information of EasyIO Holdings Pte Ltd. Such 
information and the software described herein, is furnished under a license agreement and may be used 
only in accordance with that agreement. 
The  information  contained  in  this  document  is  provided  solely  for  use  by  EasyIO  Holdings  Pte  Ltd 
employees, licensees, and system owners; and, except as permitted under the below copyright notice, is 
not to be released to, or reproduced for, anyone else. 
While every effort has been made to assure the accuracy of this document, EasyIO Holdings Pte Ltd is not 
responsible  for  damages  of  any  kind,  including  without  limitation  consequential  damages,  arising  from 
the  application  of  the  information  contained  herein.  Information  and  specifications  published  here  are 
current as of the date of this publication and are subject to change without notice. The latest product 
specifications can be found by contacting our corporate headquarters  or support channel.  
 

Trademark Notice 

 
EasyIO logo are registered trademarks of EasyIO Holdings Pte Ltd. 
 
CPT Tool is by Online Tools Inc. 
 
BACnet and ASHRAE are registered trademarks of American Society of Heating, Refrigerating and Air- 
Conditioning Engineers. All other product names and services, mentioned in this publication, that are 
known to be trademarks, registered trademarks, or service marks are the property of their respective 
owners. 
 

Copyright and Patent Notice 

This document may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced 
to any electronic medium or machine-readable form without prior written consent from EasyIO Holdings 
Pte Ltd 
 
Copyright © 2017 EasyIO Holdings Pte Ltd. All rights reserved 
 

Disclaimer 

The material in this manual is for information purposes only. The contents and the product it 
describes are subject to change without notice. EasyIO Holdings Pte Ltd makes no 
representations or warranties with respect to this manual. In no event shall  EasyIO Holdings Pte Ltd be 
liable for any damages, direct or incidental, arising out of or related to the use of this manual. 
 

EasyIO Holdings Pte Ltd

 

101, Cecil Street #09-07 
Tong Eng Building 
Singapore 069533 
  
Worldwide and Asia Pacific Support 

[email protected]

  

Americas Support 

 

 

[email protected]

  

Europe Support   

 

 

[email protected]

  

 

 

Summary of Contents for FG-20


















Reviews: