step 8
step 7
The wheeled base, bridge and bath base
should now be securely connected
together using the latches.
Before continuing with the setup it is
important to ensure that the tracks are
level horizontally.
If the tracks are not level horizontally,
adjust the height of the bath base until the
tracks are level.
To do this screw the thread on the rubber
feet up or down depending on which way
the height needs to be adjusted.
NOTE
- Do not unscrew the thread more than 1”.
If you require more height, raise the bath
base track by adjusting the height adjust-
ment tubes up or down.
www.easycaresystems.co.uk
