Cleaning
10
Opening the product
1. Open the clips
1
on both sides of the cart (see
Fig. A
).
2. Pull the front and back sides away from each other (see
Fig. B
).
3. Lower the bottom
2
into place (see
Fig. C
).
4. Remove the side support bars
3
from the slots in the bottom of the cart
and clip them into place on the top of the side walls (see
Fig. D
).
5. Make sure the clips on both sides of the cart are locked into place.
6. Raise the telescopic handle
5
by pressing down on the handle
button
4
and pulling upwards until the metal pins on each side lock into
place (see
Fig. E
).
The cart is ready for use (see
Fig. F
).
Closing the product
1. Press and hold the handle button
4
while pushing down on the
telescopic handle
5
in order to lower it (see
Fig. E
).
2. Remove the side support bars
3
from the top of the side walls and clip
them into place in the slots in the bottom
2
of the cart.
3. Lift the bottom of the cart all the way up and push the side walls towards
each other a little bit.
4. Unlatch the clips
1
on the side of the cart and push the front and back
sides together.
5. Relatch the clips.
Cleaning
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such
as knives, hard scrapers and the like.
They could damage the surfaces.
1. Use a damp cloth to wipe off the product.
2. Then let all parts dry completely.
