Operation
18
Using the handheld vacuum
1. Detach the handheld vacuum
12
from the floor vacuum
1
.
To do so, press the release buttons
4
and lift the handheld vacuum out of
the holder
2
(see
Fig. E
).
2. If necessary, attach the appropriate vacuum attachment onto the suction
opening
18
of the handheld vacuum:
• Use the crevice nozzle
20
for vacuuming areas that are diffi cult to
reach.
• Use the upholstery brush
21
for cleaning delicate surfaces.
3. Switch on the handheld vacuum by pressing the on/off button
13
. The
indicator light in the on/off button will glow blue during operation.
4. Pressing the on/off button again to switch off the handheld vacuum.
Using the floor vacuum
1. Make sure the handheld vacuum
12
is placed in the holder
2
of the floor
vacuum.
To do so, first insert the suction opening
18
of the handheld vacuum into
the lower part of the holder and then push the handheld vacuum towards
the back of the holder until it locks into place (see steps 1 and 2 in
Fig. D
).
2. Make sure the the floor vacuum
1
is removed from the charging
station
27
.
To do so, pull the floor vacuum up and out of the bracket
28
. Hold the
base
23
of the charging station steady with your foot.
3. Press the on/off button
33
on the handle
3
to switch on the floor
vacuum (see
Fig. F
). The indicator light in the on/off button
13
of the
handheld vacuum will glow blue and the operation lights
11
of the floor
vacuum will turn on during operation.
The floor vacuum cleaner will start operation in economy mode, with
reduced suction power and a longer operating time.
Press the ECO button
34
to change to normal suction mode.
4. If necessary, press the handle release button
35
to fold down the
handle to clean hard-to-reach areas (e.g. under a desk) (see
Fig. G
).
5. Press the on/off button on the handle to switch off the floor vacuum.
6. Place the floor vacuum back onto the charging station.