Technical data
21
Technical data
Model:
HTJ-2108-USBM / HTJ-2108-USWG
Article number:
808724
Supply voltage:
120 V~, 60 Hz
Output:
25 W
Frequency:
2.4 MHz
Mist output:
max. 10.14 fl. oz./h (300 ml/h)
Water tank fill volume:
approx. 0.74 gallon (2 800 ml)
Power cable length:
approx. 5.2 ft (1.6 m)
Protection class:
II
Dimensions:
approx. 6.9 × 6.9 × 12.4" (17.6 × 17.6 × 31.5 cm)
Dust filter
Material:
Polyurethane sponge
Water filter
Replacement interval:
Every 3 to 6 months with continual use
Material:
Silver ion
FCC statement
FCC PART 18
This device complies with Part 18 of the FCC Rules.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B ISM equipment, pursuant to Part 18 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
− Reorient or relocate the receiving antenna.
− Increase the separation between the equipment and receiver.
− Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
− Consult the dealer or an experience radio/TV technician for help.
