Easy@Home GT-HUB-02-UK, User Manual

Page: 13 / 22

Check double electric blanket and parts
13
− Do not crease the appliance by placing items on top of it during
storage.
− Do not insert any needles or other sharp objects in to the double
electric blanket.
− Allow the double electric blanket to cool off completely prior to
folding and storage.
− Store the double electric blanket in a dry place.
− The double electric blanket must not be used when it is wet.
− This appliance is not intended for medical use in hospitals.
Check double electric blanket and parts
1. Take the double electric blanket out of the packaging and check whether the
double electric blanket or the individual parts are damaged. If this is the case,
do not use the double electric blanket. Contact the manufacturer via the service
address stated on the guarantee card.
2. Check whether the delivery is complete (see Fig. A ).
3. Remove the protective film from the control unit
1
.
4. Remove all packaging materials.
Prepare double electric blanket
To create the various push-fittings, proceed in the described order.
1. Connect the control unit and double electric blanket using the plug (see Fig. B ).
2. Place the double electric blanket flat onto the mattress (see Fig. C, Step a ).
The control unit should hang out of the bed in the shoulder area, so that it is not
covered up.
Make sure that the double electric blanket is not lying underneath the pillow.
Place it from the shoulder area to the foot area.
3. Attach the double electric blanket to the mattress using the cords.
4. Stretch bed sheets over the double electric blanket and mattress. The double
electric blanket must be flat and crease-free under the bed sheet.
5. Connect the power plug to a socket.
Waermeunterbett UK IRL INNEN.indd 13 03.09.2018 16:33:06