AFTER SALES SUPPORT
1 888 367 7373
07-09-14 / EWCF8B
When using an electrical appliance, basic safety precautions should also be observed, including
the following. PLEASE READ AND SAVE ALL INSTRUCTIONS BEFORE USING THE AIR CIRCULATOR FAN.
1. Always turn the fan off before removing the plug from the outlet.
2. Always turn the fan off and unplug it immediately after using and before cleaning.
3. To protect against electrical hazards, do not place the fan in water or other liquids.
Do not allow the fan to become wet or damp.
4. Do not store the fan where it can fall into water or other liquids.
5. Do not store the fan unattended when it is plugged in. Turn the fan off when leaving
the fan for an extended period.
6. Use the fan only for its intended use as described in these operating instructions.
7. Do not operate any appliance if its cord or plug is damaged, after the appliance has
malfunctioned, or after it has been dropped or damaged in any way. Always follow
the warranty instructions.
8. Place fan on a dry flat, level surface to avoid it overturning.
9. Avoid contact with moving parts.
10. Never drop or insert any object into any opening. Do not insert any objects into the
area protected by the guards.
11. Do not obstruct the airflow.
12. Do not operate the fan without the guard.
13. Close supervision is necessary when any appliance is operated near children.
14. To maintain operating efficiency, user should not operate this fan 24 hours a day, seven days a
week.
15. Do not run the cord under carpeting or cover with throw rugs, runners or similar coverings, or
under furniture or appliances. Arrange cord away from traffic areas where it will not be tripped over.
16. This fan employs overload protection (fuse). A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the fan from the outlet. Replace the fuse (see instructions next
page) and check the fan. If the replacement fuse blows, a short circuit may be present and you
should contact customer service for instructions.
WARNING: To reduce the risk of fire or electrical shock, do not use this fan with any solid–state speed
control device.
THIS APPLIANCE HAS A POLARIZED PLUG (ONE PIN IS WIDER THAN THE OTHER) TO REDUCE THE RISK OF
ELECTRICAL SHOCK. THIS PLUG IS DESIGNED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG
DOES NOT FIT FULLY INTO THE OUTLET, TRY THE PLUG THE OTHER WAY AROUND. IF THE PLUG STILL DOES
NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. DO NOT ATTEMPT TO ALTER, DISMANTLE OR FIND ANOTHER
WAY AROUND THIS SAFETY FEATURE.
3
General Information
and Safety Instructions
3
