Cleaning and maintenance
USA
AFTER SALES SUPPORT
18
USA
+1 877 386 8264
10. Switch the shaver back off.
11. Use the cleaning brush
7
to completely remove all stubbles from the shav-
er blades and the entire top part of the shaver (see
fig. A
and
I
).
12. Thoroughly rinse off the top part of the shaver and the shaver blades under
warm running water (see
fig. H
).
13. Use the On/Off switch to switch the shaver off without the shaver head for
approx. 5 – 10 seconds in order to dispel water drops from the shaver blades
4
.
14. Use a lint-free cloth or a paper towel to thoroughly dry off the shaver.
15. Firmly mount the shaver head
2
on the shaver so that the locking mecha-
nism locks into place (see
fig. F
).
16. Place the protective cap
1
on the shaver.
The shaver is now ready for use again.
User maintenance for the shaving foils
To maintain the performance of your shaver and increase the service life of the
shaving foils, you should perform user maintenance on the shaving foils every
two months as follows:
1. Put a drop of fine, non-resinous household oil on the tip of your finger.
2. Distribute the oil evenly on the shaving foils.
3. Without applying pressure, dab the shaving foils with a soft, lint-free cloth
or paper towel.
Replacing wearable parts
Ordering wearable parts
You can order a new shaving foil unit and shaver blades to replace worn ones.
You can choose between three packages:
• Shaving foil unit consisting of two shaving foils and the integrated trimmer
• Two shaver blades as a set
• Set consisting of a shaving foil unit and two shaver blades
To place your order, contact the address provided on the order form.
ble p
ble
able parts
ble parts
new shavin
new shavin
between
etween
Freigabe
g foils
oils
nd increase the se
ncrease the
ntenance on the sh
nance on th
ousehold oil on th
ehold oil on th
shaving foils.
aving foils
dab the shaving f
dab the shavi
arts
art
