Maintenance
19
Cleaning the essential oil pad
− Wash the essential oil pad
9
with warm water and let it dry completely
before using it again.
Cleaning the dust filter
1. Remove the water tank
2
from the control unit
4
and put it aside.
2. Carefully pour out any leftover water in the control unit.
Place the control unit upside down. Push in the bottom cap
20
, turn it to the
left, and remove it from the bottom opening
19
(see
Fig. G
and
H
).
3. Remove the dust filter
21
and wash it with warm water. Let it dry completely
before using it again.
4. Push the bottom cap in and turn it to the right to close the bottom opening
(see
Fig. H
).
Maintenance
Changing the silver ion ball filter
• The silver ion ball filter ensures that there are no germs in the
stagnant water.
• The silver ion ball filter should be replaced after 160 hours of
operation. Otherwise, it will lose its effectiveness.
1. Remove the water tank
2
from the control unit
4
and put it aside.
2. Remove the old silver ion ball filter
10
and replace it with a new one
(see
Fig. B
).
3. Put the water tank with the vapor absorption unit
17
facing downward onto
the control unit.
You can order/purchase a new silver ion ball filter from the address listed on the
warranty card. Only use original silver ion ball filters.
Storage
− Empty and clean the water tank
2
, remove water from the inside of the
control unit
4
, and wipe all parts dry with a cloth.
− Keep the product in the original packaging, out of the reach of children, and
in a dry place.
