Easy@Home 1094S2022, User Manual

Page: 16 / 40

Cleaning
16
knives, hard scrapers and the like. They could damage the
surfaces.
− Never attempt to clean the product by immersing it in water
or any other fluids, and do not use a steam cleaner to clean it.
Otherwise, the product could be damaged.
− Do not in any case place the product in the dishwasher. It
would be destroyed as a result.
The water tank must be cleaned every three days.
All other components must be cleaned once a week.
− Before cleaning, pull the power supply unit out of the socket.
Cleaning exterior parts
− Use a slightly moistened cloth to wipe down the outside of the product. Then let
all parts dry completely before operating the product again
Cleaning and descaling the water tank
1. Unscrew the water tank cover 6 from the water tank 5 and remove any deposits
or dirt that may have collected in the water tank
5
.
2. Fill the water tank 5 halfway with warm water and add 2 tablespoons of white
vinegar. Close the water tank
5
by twisting the water tank cover
6
tightly. Shake
the water tank 5 vigorously and let the solution soak in for about 30 minutes.
3. Drain the water tank
5
and rinse it thoroughly with clean water.
4. Allow the product to air dry completely.
Cleaning the control unit
1. Remove the water tank
5
by lifting it from the control unit and set it aside.
2. Remove any deposits or dirt that may have accumulated.
3. Fill some water into the control unit
9
and add 1 tablespoon of white vinegar. Let
this soak for about 30 minutes.
4. Empty the control unit 9 and rinse it with clear water. Make sure that the water
does not flow into the fan outlet
4
when draining.
5. Allow the product to air dry completely.
Cleaning the air vent
1. Use a damp cloth to wipe off the air vent on the control unit
9
.
If necessary, use a little vinegar to dissolve the limescale.