For more information visit
www.
easyas-shutters
.com
Fit Shutters Front Panels
Working with the front channel left to right with blades in
closed position
a. Repeat steps 5.a, b, c
Make Adjustments & Place White Hole Covers
a. First, with all blades in
closed position
check for smooth sliding operation of all panels
b. Panel edges should meet square against outer frame.
- If not, make adjustments to wheel heights (back of panel) using phillips head driver until
the shutter panel is square against frame
c. Place white covers over screw holes to finish
STEP 6
STEP 7
b.
a.
a.
b.
c.
c.
Counter Clockwise
Clockwise
