Check condition of caravan antenna inside/outside wall connection for oxidation, corrosion, breakage or even bug nests as they
will lead to poor connection and signal loss. Heavily oxidized or salt encrusted connection can lead to short circuit, in turn leading
to transformer failure.
For best results and trouble free operation of the Easytune antenna, connect 6m coaxial cable
from antenna directly to the back of Base Unit through window, floor board or opening through
caravan wall. Do not use antenna wall connection wherever possible.
To test for compatibility:
1. Unplug all coaxial cables to the base unit.
2. Power up only the base unit with the 12Vac adaptor provided.
3. A red light will come on in the base unit window.
4. Plug one end of the short coaxial cable into the antenna wall connection.
5. Plug the other end of the short coaxial cable to ANTENNA on base unit while looking at the red light in the base unit window.
6. If red light goes off or dims, unplug immediately! The antenna wall connection is NOT compatible. In such cases DO NOT use
wall connections with BD-11 antenna.
7. If red light remains on, the antenna wall socket is compatible.
NOTE:
We highly recommend the use of a hole-through-the-wall fitting available in most caravan accessories shop. This hole-
through-the-wall allows the antenna cable to connect directly to the base unit and ensures a trouble free operation at all times
eliminating any possibilities of faults in the caravan wall connections or its internal wiring.
Caution! The power adaptor has a built-in thermal fuse that is non-user-replaceable. Leaving the power adaptor plugged in with
an incompatible antenna wiring will cause the power transformer to heat up and eventually burn out the thermal fuse rendering
the transformer useless. In such cases, a replacement transformer has to be purchased.
Products and would not be covered under warranty.
Warning!
Never use any coaxial cables other than the ones supplied with the antenna. Never attempt to lengthen or shorten any
of the supplied coaxial cables by splicing. An improperly spliced cable or an improperly terminated cable connector could cause
fire hazards due to short circuit and will cause the transformer to heat up and eventually activating the internal thermal safety
fuse rendering the transformer useless. Never use the adapter for any other appliance other than the intended product.
Never connect any other antenna product to the EasyTune BD-11a base unit. Irreparable damage may result.
Any of the above will result in void of warranty.
Made In China
