Easy-Laser XT11, User Manual

Page: 34 / 81

PREPARE
On the Prepare view, you enter machine and coupling properties. It is possible to go back to the Prepare view later
and enter/alter information.
Tap to display a property menu for the Coupling or Machine.
A. The Prepare icon is active in the workflow.
B. Tap to open coupling properties. (Coupling diameter,
RPM and Tolerance.)
C. Tap to open machine properties. (Name, Thermal com-
pensation and Softfoot.)
D. Tap any input field to enter distance.
Prepare view
NOTE! Make sure that the measuring units are charged.
Menu icons
Tap to open the menu.
Mirror the machines.
Show Gap. See "Coupling diameter" on page 36
Add a note to the report. See " Report" on page 55
See "Camera" on page 15
Finalize the measurement. See "Finalize" on page 10
Set up measuring units
1. Mount the S-unit on the stationary machine and the M-unit on the movable machine. You can place the meas-
uring units up to 10 m apart.
2. Mount the units facing each other. Make sure they are at the approximately same rotational angle and radius.
You need to place the measuring units with an offset. See image.
Place the measuring units with an offset
34
HORIZONTAL