4
Do not overload electrical outlets beyond their capacity as this can result in fire or
electrical shock. This unit is rated at 15 amps and should be the only item
plugged into a 15 or 12 amp branch circuit. When connected to a 20 amp branch
circuit any items in addition to the EZ27 must not exceed 4 amps.
Adjust only those controls that are specified in these Operating Instructions.
Do not attempt to service or repair the laminator yourself. Unplug the laminator
from the electrical outlet and contact an authorized service representative under
any of the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled into the laminator or it has been exposed to water.
• If the laminator has been subjected to excessive jarring through being
dropped or bumped.
• If the laminator does not operate normally when following the operating
instructions.
INTRODUCTION
Congratulations on your purchase of the new eco-friendly Easy-Lam
green
™
27” Roll Laminator.
This unit is designed to provide years of trouble-free service.
The Easy-Lam
green
™
will accept rolls of laminating film up to 27” wide in both 1.5 and 3 mil
thicknesses. Paper and card stock up to 80mm thick may be laminated without adjusting the feed
rollers.
Your Easy-Lam
green
™
is preset at the factory for most applications so any adjustments should
be minor. A digital heat controller provides continual indication of the Heat Shoe temperature and
may be adjusted as needed.
Laminator Standard Features...
Preset laminating roller pressure and speed require no adjustment.
Feed table with adjustable guide.
Digital heat controller for monitoring temperature.
Teflon® coated Heat Shoes for easy cleaning.
Laminating film widths up to 27”.
Total thickness up to 86 mils (laminate plus paper).
Auto shutoff cuts all power to the laminator.
Standby mode conserves energy between lamination.
