Assemble and Install Door Ramp
You will need to prepare two ramps: for the front and back doors.
13
.1
Using 3/4" x 3 1/2", 3/4" x 5 1/2", 1 1/2" x 3 1/2" and 1 1/2" x 7 1/4" pressure-treated lumber,
construct door ramp using the drawing below as a reference. You will need three boards cut to 2'-9 1/2"
that will be support girts, two boards cut to 1'-2 1/2" that will be joists (cut the top edge to fit the angle of
support girts), one board cut to 5" x 2'-9 1/2" that will be rim joist and ten boards cut to 2'-9 1/2" that will
be top sheathing.
13
.2
Assemble siding shields with 2" and 3" galvanized nails.
STEP
13
2'-9 1/2"
2'-11"
