background image

3 SOFT TOUCH PUSH KNOB LOCKING HINGE

HINGE OPERATION

For safety, follow these Soft Touch push knob hinge 
instructions:

The OX Telescopic Multi-ladder inner section allows the ladder to be 
folded into 3 set positions; extension ladder, twin stepladder, and 
storage. Each of these configurations is made possible by using 
the Soft Touch push knob locking hinge located on each side of the 
ladder.

To adjust the angle of the ladder:

1)  With the center hinges in the closed position (See Figure 1) push 

the push knobs with the palm of your hand directly into the 
center of the ladder, they will stay in the open position.

2)  In the open position (See Figure 2) the ladder angle can be 

adjusted.

Note: 

The open position can be verified by the exposed triple inner 

posts on the push knob (See Figure 2).

3)  When the ladder reaches any of the 3 set positions the push knobs 

will automatically spring back into the closed position.

4)   To close ladder to the folded position repeat steps 1-3.

Note:

 Excess pressure on the centre hinge will make the push knob 

difficult to operate. Do Not Use any tools to pry or manipulate the hinge 
and or the push knob. If the push knob is difficult to use simply move 
one of the leg sections in or out to unbind the lock.

WARNING

-  Serious injury or death could result if supporting hinges 

are NOT LOCKED when ladder is in use.

-  Make certain supporting hinges are LOCKED before 

using ladder EACH TIME.

6

Summary of Contents for Trade Series











Reviews: