2
© Copyright 2011 Easthill Group, Inc.
SPECIFICATIONS
Rated Electrical Input
............... 110 VAC; 50-60Hz; 15AMP; Single-Phase
..................................................... 220 VAC; 50-60Hz; 30AMP; Single-Phase
No Load Voltage
........................ 96 V
Rated Duty Cycle
...................... 60%@40A
Output Current
........................... 40 AMP
Weight
......................................... 25.0Lbs (11.34kg)
Overall Dimensions
................... 20” (508mm) X 9.75” (248mm) X 20” (508mm)
READ AND UNDERSTAND ALL INSTRUCTIONS AND PRECAUTIONS BEFORE PROCEEDING.
This unit emits a powerful high voltage and extremely high temperature plasma arc of superheated air
which can cause severe burns, dismemberment, electrical shock and death. Eastwood shall not be held
liable for consequences due to deliberate or unintentional misuse of this product.
Plasma Cutting is the quickest, most effi cient way to cut through steel or aluminum. Your Eastwood
Versa-Cut Model 12740 Plasma Cutting System with High-Frequency Inverter Technology is capable of
cutting up to 3/8” thick aluminum and steel with precision and ease. The advanced inverter technology
provides a powerful DC current at a super-high frequency, over 100KHz, with the added advantage of a
light weight unit. A built-in piloting arc system guarantees an instant arc strike and voltage sensing circuitry
allows 120 or 240 volt operation with no adjustments required.
INTRO
STATEMENT OF LIMITED WARRANTY
The Eastwood Company (hereinafter “Eastwood”) warrants to the end user (purchaser) of all new welding and cutting equipment (collectively called the “products”) that it
will be free of defects in workmanship and material. This warranty is void if the equipment has been subjected to improper installation, improper care or abnormal operations.
WARRANTY PERIOD:
All warranty periods begin on the date of purchase from Eastwood. Warranty Periods are listed below, along with the products covered during those warranty periods:
3 Year Warranty on Material, Workmanship, and Defects:
• Eastwood Versa-Cut Plasma Cutter
Items not covered under this warranty: Contact tips, nozzles, wire, and ground clamp and cable. All other components are covered by the warranty and will be
repaired or replaced at the discretion of Eastwood.
2 Years:
• All Welding Helmets.
CONDITIONS OF WARRANTY TO OBTAIN WARRANTY COVERAGE:
The purchaser must contact Eastwood. Final determination of warranty on welding and cutting equipment will be made by Eastwood.
WARRANTY REPAIR:
If Eastwood confi rms the existence of a defect covered under this warranty plan, Eastwood will determine whether repair or replacement is the most suitable option
to rectify the defect. At Eastwood’s request, the purchaser must return, to Eastwood, any products claimed defective under Eastwood’s warranty.
FREIGHT COSTS:
The purchaser is responsible for shipment to and from Eastwood.
WARRANTY LIMITATIONS:
EASTWOOD WILL NOT ACCEPT RESPONSIBILITY OR LIABILITY FOR REPAIRS UNLESS MADE BY EASTWOOD. EASTWOOD’S LIABILITY UNDER THIS WARRANTY SHALL
NOT EXCEED THE COST OF CORRECTING THE DEFECT OF THE EASTWOOD PRODUCT. EASTWOOD WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
(SUCH AS LOSS OF BUSINESS, ETC.) CAUSED BY THE DEFECT OR THE TIME INVOLVED TO CORRECT THE DEFECT. THIS WRITTEN WARRANTY IS THE ONLY EXPRESS
WARRANTY PROVIDED BY EASTWOOD WITH RESPECT TO ITS PRODUCTS. WARRANTIES IMPLIED BY LAW SUCH AS THE WARRANTY OF MERCHANTABILITY
ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY FOR THE EQUIPMENT INVOLVED. THIS WARRANTY GIVES THE PURCHASER SPECIFIC LEGAL RIGHTS.
THE PURCHASER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
