2
Eastwood Technical Assistance: 800.544.5118 >> [email protected]
The
EASTWOOD 3/4” X 20-1/2” PRO MINI ANGLE BELT SANDER
is compact and powerful with an
adjustable angle and articulated sanding arm for ease in grinding and sanding in the most difficult to
access areas. It features a sealed ball bearing drive assembly for smooth, low vibration operation and
long life. The precision diecast housing provides a solid foundation and offers ergonomic, one handed
operation controlled by a convenient handle mounted paddle trigger.
CONTENTS
(1)
Pro Mini Angle Belt Sander
(1)
4 mm Hex-Key Wrench
(1)
3 mm Hex Key Wrench
(1)
80 Grit, 3/4” x 20-1/2” Abrasive Belt
(1)
100 Grit, 3/4” x 20-1/2” Abrasive Belt
(1)
1/4” NPT Air Inlet Coupler
SPECIFICATIONS
•
RPM:
17,000 free speed
•
Operating Air Pressure:
90 psi
•
Max Air Consumption:
8 CFM [198 l/m] @90 PSI [6.2 bar]
•
Inlet thread size:
1/4” FNPT
•
Required Belt Size:
3/4” x 20-1/2”, minimum 17,000 RPM
•
Belt Articulation Angle Range:
50°
REQUIRED FOR USE
• The inlet air supply should have a moisture separator capable of removing all moisture and
impurities from the air supply. Moisture and/or oil in the air supply will cause poor tool
performance and damage.
• A suitable regulator must be used to limit incoming air pressure to 90 PSI maximum.
Excessive air pressure can cause permanent damage to the unit and possible serious
personal injury from bursting.
• For best results, a compressor capable of providing a minimum of 8 CFM @ 90 PSI is
recommended. Less available CFM will negatively affect the performance of the
Belt Sander and may overwork the compressor.
