4
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
DUTY CYCLE
The rated Duty cycle refers to the amount of welding that can be done within an amount of time. It is easiest to look at your welding time in blocks of 10 Minutes and
the Duty Cycle being a percentage of that 10 Minutes. If welding at 130 Amps with a 60% Duty Cycle, within a 10 Minute block of time you can weld for 6 Minutes
with 4 Minutes of cooling for the Welder.
If the Duty Cycle is exceeded, and the built-in Breaker is tripped, allow the unit to cool for a minimum of 15 minutes. When a safe temperature has been reached, the
Welder can be switched back on. To increase the duty cycle, turn down the Voltage Output control. Going above 130 Amps will yield a lower Duty Cycle.
SPECIFICATIONS
Wire Type
Solid
Stainless
Flux Core
Aluminum (Spool Gun)
Diameter
0.023” - 0.035”
[0.6mm - 0.9mm]
0.023” - 0.035”
[0.6mm - 0.9mm]
0.030” - 0.035”
[0.8mm - 0.9mm]
0.030” - 0.035”
[0.8mm - 0.9mm]
MIG WELDING WIRE CAPACITY
Power Voltage (V)
1 phase, 120VAC / 240VAC, 60Hz
Maximum Output No Load Voltage (V)
61V DC
Rated Input Current (Amps)
120V: 24 Amps 240V: 29.6 Amps
Output Current Range
120V: 30 - 120 Amps 240V: 30 - 180 Amps
Duty Cycle (%) 120V
30% @ 90 Amps 60% @ 65 Amps 100% @ 50 Amps
Duty Cycle (%) 240V
30% @ 180 Amps 60% @ 130 Amps 100% @ 100 Amps
Wire Feed Speed (inch/minute)
120V: 80 - 280 IPM 240V: 80 - 551 IPM
Maximum Material Thickness
5/16”
Weight
25.3 lbs. [11.5 kg]
Dimensions
18” x 8.5” x 13.25” [457mm x 215mm x 337mm]
