manualshive.com logo in svg

Eastwood 51460, Instruction Manual, Page: 17 / 20

Share
Download
Eastwood 51460 Instruction Manual Download Page 17

To order parts and supplies: 800.343.9353  >>  eastwood.com 

17

AVAILABLE BUFFING ITEMS

EASTWOOD BUFF MOTORS

#51460, 1 HP, Dual-Speed Motor

  -  120 VAC, 60hz, 3.36/6.30 Amps,  

  370/750 Watts

  -  Free Speed RPM = 1725/3450
  -  Arbor Size = 3/4”
  -  Buff Wheel Capacity = 10”

#13542, 1/2 HP Motor

  -  120 VAC, 60hz, 3.36 Amps,  

  370 Watts

  -  Free Speed RPM = 3450
  -  Arbor Size = 5/8”
  -  Buff Wheel Capacity = 8”

EASTWOOD BUFF COMPOUNDS

#32030 EMERY

 (Dark Gray)  

For fast cutting on iron, steel and other hard metals to remove scratches, rust, corrosion 
burrs etc. Use with Sisal wheels. Do Not use on gold or silver.

#32031 STAINLESS

 (Light Gray)  

For buffing stainless and other steels, chromium, nickel plate and some harder plastics.  
Use with Spiral or Ventilated buffs. Do Not use on gold or silver.

#32032 TRIPOLI

 (Brown)  

For buffing all base metals. Use on brass, aluminum, pewter, copper etc.  
Also plated surfaces. Use with Spiral or Ventilated wheels. Do Not use on gold or silver.

#32033 WHITE ROUGE

 (White)  

For final coloring on metal. Produces a brilliant high shine. Removes light scratches.  
Use with Loose or Canton Flannel buff wheels.

#32034 JEWELERS ROUGE

 (Red)  

For the highest finish on gold, silver and other precious metals.   
Use with Canton Flannel or Felt buff wheels for best results.

#32035 PLASTIC 

(Blue)  

For cut and coloring on hard plastics. Do Not use on soft or low melting point plastics like 
polyethylene. For cut-down, use Spiral Sewn buff wheel. For final high luster, use Flannel  
or String buffs.

Summary of Contents for 51460





















Reviews:

No comments