background image

To order parts and supplies: 800.343.9353  >>  eastwood.com 

3

THIS JACK CAN TIP OR COLLAPSE CAUSING SEVERE INJURY!

• 

DO NOT

 exceed the rated 1000 lbs. [453 kg.] weight capacity.

• 

DO NOT

 stand on the Transmission Jack.

•  Use only on a hard, smooth, level and clean work surface. DO NOT use on a sloped or rough textured surface, earth, grass, sand, 

gravel or any other loose or unstable surface.

•  Concentrate load points to the center of the Transmission Jack Lifting Pad and only the Lifting Pad. Failure to do so can cause the  

balance to shift suddenly, tipping the Jack and its load which can quickly cause severe injury and property damage!.

CRUSH HAZARD!

• 

DO NOT

 use a Jack to support a vehicle while performing any work. The vehicle MUST be supported with appropriate equipment  

such as approved Jack Stands or equivalent immediately after lifting.

• 

DO NOT

 remove or cover any of the factory supplied labels or warnings! They include specific safety information that must be  

communicated to future users.

INJURY HAZARD!

•  No alterations or modifications shall be made to this product. 

IMPROPER MOTOR VEHICLE REPAIR WORK CAN RESULT IN INJURY OR DEATH!

•  Performing automotive repair work can cause injury, death and vehicle accidents. DO NOT attempt to use this tool or begin work  

without proper training and a thorough understanding of motor vehicle mechanical systems.

•  Always consult an authorized manufacturer’s service manual or reference materials on the particular vehicle.

INJURY HAZARD!

•  This Transmission Jack has moveable components that can crush and pinch. Keep fingers and hands away from pinch points  

when operating. 

SAFETY INFORMATION

Summary of Contents for 33916









Reviews: