10
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
MAINTENANCE
IMPORTANT NOTE: The following maintenance should be performed before each use:
• Inspect Blade for cracks, damage or premature wear.
• Clean dirt and debris from motor air cooling slots.
• Clean dirt and debris from Blade Mounting Shaft.
BRUSH REPLACEMENT
NOTE:
If motor fails to start as trigger is depressed after extensive use, the Motor Brushes likely need
to be replaced.
• Remove the Brush Caps (one each at top and bottom of motor housing) with a medium
screwdriver
(FIG 6)
.
• Pull Brush from socket
(FIG 7)
.
• Inspect Brush.
NOTE:
Brushes are considered worn if less than 1/8” of carbon is remaining.
• Replace with new brush.
NOTE:
The carbon contact goes in first and is keyed to the rectangular socket.
• Replace Brush Caps and tighten.
FIG. 6
FIG. 7
