To order parts and supplies: 800.343.9353 >> eastwood.com
7
SET-UP
GUIDE FENCE
• If using the Guide Fence, it may be installed by sliding the flat bar through the notch in the right
or left side of the Base Plate with the number embossed gauge surface facing upward
(FIG 1)
.
• Align the desired distance dimension with the center of the “V” notch in the leading edge of the
Base Plate
(FIG 1)
.
• Using the included 5mm Hex Key, tighten the set-screw to lock the Guide Fence in place.
NOTE:
The handy Hex Key retainer molded into the cord Strain Relief provides safe, convenient
storage for the Hex Key when not in use.
Base Plate
✓
FIG. 1
FIG. 2
Guide Fence
Set Screw
“V” Notch
Chip
Receptacle Lid
BLADE DEPTH
• Loosen the Lock Lever attached to and located on the right side of the Base Plate. Raise it to
align the cast-in pointer to the desired depth as embossed on the gauge surface of the slotted
Swing Arm
(FIG 2)
.
Scale
✓
✓
✓
✓
✓
Drive Lock Button
Swing Arm
Depth Gauge
Blade Guard
Base Plate
✓
✓
✓
✓
✓
Lock Lever
✓
