4
Eastwood Technical Assistance: 800.544.5118 >> [email protected]
SETTING THE TORQUE WRENCH
1.
To unlock, pull the Lock Collar towards
the Hand Grip
(FIG 1)
.
2.
While holding the Lock Collar back, turn
the handle clockwise to the desired
torque value. To select the desired
torque, turn the handle until the “0”
aligns with the major graduation
(FIG 2)
,
then continue turning until the desired
minor graduation is in line with the barrel
center line
(FIG 3)
.
3.
Release the Lock Collar. Rotate the grip
slightly until the Lock Collar springs
forward and locks.
4.
The wrench is now set for operation.
FIG. 1
✓
FIG. 2
FIG. 3
Pull
Lock
Collar
Down
Rotate
Handle
Do not turn the handle below the
minimum torque setting or above
the maximum torque setting.
Shown
set to
70 ft-lb
Shown
set to
73 ft-lb
