To order parts and supplies: 800.343.9353 >> eastwood.com
5
FIG. 3
ATTACH LEGS TO BLAST CABINET (B TO A)
• Slide a Leg
(B)
under the rear, lower corner of the cabinet
(A)
as a rear leg with 4 screw holes aligned
(FIG 3)
.
NOTE:
2 of the screw holes are inaccessible at this point.
• Pass 2 M6 x 12mm Screws through holes from the outside,
add M6 Nuts
(FIG 4)
. Tighten securely.
• Place another Leg
(B)
over the front corner of the Cabinet
(A)
aligning 4 sets of holes.
NOTE:
It is advisable to have a helper support the Leg while
aligning holes, and installing hardware.
• Insert 4 M6 x 12 mm Screws from the outside and add
4 Nuts
(FIG 5)
.
• Repeat for front and rear legs at opposite side.
FIG. 4
FIG. 5
A
✓
B
✓
Holes
✓
✓
✓
A
✓
B
✓