4
Eastwood Technical Assistance: 800.544.5118 >> [email protected]
OPERATION
• Before each use, inspect Punching Dies for cracks and damage.
• If desired, set Work Stop to the required depth.
• Raise Punch Lever to open Punch.
• Insert material and lower Lever to close Punch.
• Slowly apply increasing pressure to the Punch by squeezing the Lever and Punch Body
together. Ensure that no fingers or objects are between the Lever and Body of the tool.
DIE REMOVAL AND REPLACEMENT
TO REMOVE PUNCHING DIES:
1.
Loosen Lower Die Set Screw with 2.5mm hex key (not included).
2.
Use Key to remove lower Die.
3.
Remove Upper Die Set Screw.
4.
Remove Upper Die through the Body of the tool.
TO INSTALL PUNCHING DIES:
1.
Insert Upper Die through the Body of the tool.
2.
Install Upper Die Set Screw.
3.
Use included Key to Install Lower Die. Thread Die into tool until it stops.
4.
Install Lower Die Set Screw.
All manuals and user guides at all-guides.com