8”, 1/2 HP
BENCH GRINDER/BUFFER
INSTRUCTIONS
Part #13576
Page 1: ...8 1 2 HP BENCH GRINDER BUFFER INSTRUCTIONS Part 13576 ...
Page 2: ...F SWITCH and STOP USE IMMEDIATELY SPECIFICATIONS 120V AC 60Hz 1 2 Horsepower Motor 1 2 Shaft Diameter 3450 RPM 8 x 1 Left side Grinding Wheel 36 Grit 8 x 1 Right side Spiral Sewn Cotton Buff Wheel ASSEMBLY AND SET UP Remove Grinder Buffer parts bags and hardware from packaging Be careful not to discard parts bags with packaging Attach Tool Rest to lower edge of wheel guard opening with supplied kn...
Page 3: ...eel rotates in a Counter Clockwise direction when viewed from the right side When viewed from the front the top is rotating toward the operator ALWAYS work on the segment of the buff wheel BELOW the centerline of the shaft so that it is rotating down and away from you If applied ABOVE the centerline objects can be violently hurled toward you causing severe injury or death Fig E ALWAYS buff objects...
Page 4: ... or fraying Too much pressure being applied to the wheel Reduce pressure Buffed object too course for wheel grade Choose a courser buff wheel Buff Wheel loading up or glazing Too much buff compound being applied to the wheel Clean wheel by GENTLY applying a large screwdriver blade pointing DOWNWARD against rotating wheel to clean Apply less compound to wheel Buildup or caking of compound on object...
