6
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
STORAGE
• Lower the Upper Blade assembly, insert the Locking Pin through both the Upper Blade Housing and the Body in the CLOSED position
(FIG 1)
and Remove Handle.
• Apply a thin film of light oil or rust-preventive to all bare steel areas.
Store in a clean, dust-free, dry, dampness free area preferably covered with plastic sheeting.
MAINTENANCE
NOTE:
Maintenance should be performed before each use.
• Check tightness of all hardware.
• Check operation for binding. Lubricate pivot points and gears periodically with a medium bodied lubricating oil.
• Inspect Blades for cracks, damage or premature wear. Replace if damaged.
• Clean dirt and debris from Shear Deck.
The blades are extremely sharp! Use extreme care when handling to avoid severe cuts or loss of fingers!
Produces
a Rough,
Jagged Cut or
Fails to Cut
Worn Blades
Replace Blades.
Material Too Thick
Refer to Maximum Material Specs.
Blades out of Adjustment
Follow Adjustment Procedure.
TROUBLESHOOTING