STORAGE
• Lower the Upper Blade assembly, insert the Locking Pin through both
the Upper Blade Housing and the Body in the
CLOSED
position
(FIG
A)
. and Remove Handle.
• Apply a thin fi lm of light oil or a rust-preventive product to all bare steel
areas.
CAUTION!
The blades are extremely sharp! Use extreme care
when handling to avoid severe cuts or loss of fi ngers!
• Store in a clean, dust-free, dry, dampness free area preferably covered
with plastic sheeting.
MAINTENANCE
NOTE:
Maintenance should be performed before each use.
• Check tightness of all hardware.
• Check operation for binding. Lubricate pivot points and gears
periodically with a medium bodied lubricating oil.
• Inspect Blades for cracks, damage or premature wear. Replace if
damaged.
• Clean dirt and debris from Shear Deck.
