EASTRON SDM630MV-2L Dual Load User Manual
Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.
Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn
Set-up Entry Methods
Some menu items, such as password and CT, require a four-digit number entry while others, such
as supply system, require selection from a number of menu options.
Menu Option Selection
1) Use the
and
buttons to select the required item from the menu
2) Press
to confirm your selection
3) If an item flashes, then it can be adjusted by the
and
buttons. If not, there
maybe a further layer.
4) Having selected an option from the current layer, press
to confirm your selection.
The SET indicator will appear.
5) Having completed a parameter setting, press
to return to a higher menu level. The
SET indicator will be removed and you will be able to use the
and
buttons for
further menu selection.
6)On completion of all setting-up, press
repeatedly until the measurement screen is
restored.
Number Entry Procedure
When Setting up the unit, some screens require the entering of a number. In particular, on entry
to the setting up section, a password must be entered. Digits are set individually, from left to
right. The procedure is as follows:
1)The current digit to be set flashes and is set using the
and
buttons
2)Press
to confirm each digit setting. The SET indicator appears after the last digit has
been set.
3)After setting the last digit, press
to exit the number setting routine. The SET indicator
will be removed.
Change password
