INSTALLATION INSTRUCTIONS
18
January 1996 – 990602
[2] Set the date and time:
(a) Press the DENSITY INCREASE and DENSITY DECREASE BUTTONS at the same time. The values in
the DATE and TIME DISPLAYS will flash.
(b) Press the DATE BUTTONS to select the date you want. The DATE BUTTONS are programmed to the date
format selected earlier.
• For example, if your date format is month/day/year, the left DATE BUTTON controls the month, the
middle DATE BUTTON controls the day, and the right DATE BUTTON controls the year.
• If your date format is day/month/year, the left DATE BUTTON controls the day, the middle DATE
BUTTON controls the month, and the right DATE BUTTON controls the year.
• If your date format is year/month/day, the left DATE BUTTON controls the year, the middle DATE
BUTTON controls the month and the right DATE BUTTON controls the day.
(c) Continue to press the appropriate DATE BUTTONS until the correct date is displayed on the LCD.
(d) Press the TIME BUTTONS to select the time. The TIME BUTTONS are programmed to the time format
selected earlier, either a 12- or 24-hour clock.
• In both the 12- and 24-hour time formats, the left TIME BUTTON controls the hour, and the right TIME
BUTTON controls the minutes.
(e) Continue to press the TIME BUTTONS until the correct time is displayed on the LCD PANEL.
(f) PRESS the DENSITY INCREASE BUTTON only, approximately 2 - 3 seconds, until the DATE and TIME
DISPLAYS stop flashing.
Note
• The DENSITY BUTTONS are deactuated while the DATE and TIME DISPLAYS are flashing.
• The time or date cannot be changed if a PATIENT ID CARD is in either the P-A or A-P CARD SLOT.
H139_0003BC
10
9
8
7
6
5
4
3
2
1
PM
TIME DISPLAY
DATE DISPLAY
LCD PANEL
H139_0003BCA
BUTTON
INCREASE
DENSITY
BUTTON
WINDOW
TIME BUTTONS
DATE BUTTONS
BUTTON
DECREASE
DENSITY