TUBULAR CONVENTIONAL, PAGE NO :8
Tubular Plate Technology
As the name suggests, it is a design in Tubular form for the positive plate and grid pasted
design for the negative plate in order to accumulate more active material as compared
to other plate technologies. Raw Material used for enhanced battery performance.
•
Pure Lead Alloy
•
Optimized antimony lead – improves cycle life and reduces water loss
•
Polyethylene separator with higher thickness sleeve type
•
Aesthetic container made of polypropylene with robust drop test passed.
•
Gauntlet – 100% polyester with resin less than 24%
•
Industrial LR grades sulphuric acid
•
Optimum use of red oxide
Technical Specification
•
Operating temperature range : -20ºC to +55ºC
•
Grid Alloy
: Optimized antimony alloy for positive & negative.
•
Applicable standards
: IS 13369 : 1992
•
Design cycle life
: 1100 cycle at 80% DOD & > 2000 cycle at
50% DOD @ 27ºC.
Advantages
Tubular Positive Plates – Proven cycling & deep cycling capabilities.
Low Antimony Alloy – Longer shelf life because of very low self discharge
High Pressure Die Cast Spine Grids – Rate of grid corrosion is very low and hence
floats life.
Supplied in filled & charges condition – 100% capacity on first discharge
Separator – Special High Porosity & Low Resistance Separator