E105 USER MANUAL
Launch
mode
Turn the TX/RX switch to the TX,Launch mode will be entered at this time.
Presss the power button and hold it for 2 seconds to start,it will enter Bluetooth
search status when power button red and blue lights alternate flash quickly,the
power button turns blue and constantly on and then flashes slowly when one
device is connected,bluetooth will automatically search and pair the next
device ,the power button turns the blue light to the red light and then turns purple
and constantly on when the second device is connected (turn the product off after
connected the device, you just press the power button to restart and the
bluetooth will automatically connects the paired devices)
Turn the SPDIF/AUX switch to the AUX, input the audio source signal from AUX
headphone jack,then the two paired Bluetooth devices will play the audio input
fromAUX headphone jack at the same time.
Turn the SPDIF/AUX switch to the SPDIF,when fiber optic signals are input from
SPDIF TX interface,the two paired bluetoothdevices can simultaneously play
audio input from SPDIF TX interface.
You can press the power button for 5seconds to shutdown at any state
。
