- 13 -
second(less than 2 seconds), select the function setting, choose the bypass output interface, at the
moment, the letters “BPS” will flash.
②
Enter the Bypass output selecting interface. Press and hold the function setting key
for more
than half a second(less than 2 seconds), then come to setting interface of BPS, at this time, the
letters “BPS” will light for a long time. The “ON” letter will flash. Press and hold the inquiring key
（
,
）
for more than half a second (less than 2 seconds) to determine whether the BPS
function is used or not. If used, the corresponding word is “ON”, if not, the word is “OFF”. It can
be determined by yourself.
③
Confirm the Bypass output selecting interface. After selecting ON or OFF, press and hold the
function setting key
for more than half a second (less than 2 seconds), Now, the BPS setting
function is completed and the “ON” or “OFF” will light without flash.
④
Press and hold function setting key
for more than 2 seconds, exit from the setting interface and
return to main interface.
⑤
After setting BPS as ON, when mains power plugged in without turning on the UPS or no mains
power plugged in, there is bypass output but no power down backup function.
2 5 %
5 0 %
7 5 %
1 0 0 %
2 5 %
5 0 %
7 5 %
1 0 0 %
L
INE
2 5 %
5 0 %
7 5 %
1 0 0 %
2 5 %
5 0 %
7 5 %
1 0 0 %
L
INE
3.6.3 Output voltage setting
①
Enter the setting interface. Press and hold the function setting key
for more than 2 seconds,
then come to setting interface, Press and hold the inquiring key
（
,
）
for more than half a
second(less than 2 seconds), select the function setting, choose output voltage setting interface, at
the moment, the letters “OPU” will flash.
②
Enter the output voltage selecting interface. Press and hold the function setting key
for more
than half a second(less than 2 seconds), then come to setting interface of output voltage OPU, at
this time, the letters “OPU” will light for a long time. The numerical value below the OPU will
