VANCOUVER DINING CHAIR WITH MICROFIBER UPHOLSTERED
SEAT
- 4 -
STEP 2
Attach the seat frame and U stretchers (D) from step 1 to the chair back (A) by using bolts (2) and
washers (3) and (4) then slightly tighten it with Allen Key (5) as shown below:
Note: DO NOT fully tighten any of the bolts, until the chair is assembled.
Put the chair on a flat level surface to make sure the chair is level and then tighten the all bolts.
STEP 3
5
2
3
4
X2
