10
3.2 DC mV Measurement
Press
to re-select the DC mV function (the display unit is DC mV), the
connection mode is same to that of voltage measurement. The screen will display as
shown in Figure 3.2-1.
Figure 3.2-1
3.3 Resistance Measurement
Press
to reselect the DC mV measurement function (Display unit is Ω)
Figure 3.3-1
The Over Span Under Open Circuit
Resistance measurement supports the connection type of two-wire system, three-wire
system and four-wire system. The calibrator can be switched to three-wire system or
four-wire system according to actual connecting type. The respective connecting types
are listed in Figure 3.3-2: Press
and
to select the connection mode forcibly.
