16
4.2 Automatic Ramp the Output
Auto ramping gives you the ability to continuously apply a varying stimulus from the
calibrator to a transmitter, while your hands remain free to test the response of the
transmitter. When you press
, the calibrator produces a continuously repeating
0 % - 100 % - 0 % ramp in your choice of three ramp waveforms :
0%-100%-0%
40-second smooth ramp
0%-100%-0%
15-second smooth ramp
0%-100%-0%
Stair-step ramp in 25 % steps, pausing 5 seconds at each
step.
Press any key to quit ramp output function.
4.3 Factory Reset
Factory rest consists of the following items:
The upper and lower working modes recover to DC V measurement function.
Automatic shutdown time is reset to be 30 min and becomes effective.
LCD backlight brightness is reset to be 60%.
Output range is recovered to be factory default.
Start the calibrator and press
until the buzzer works and the recovery of factory
default will enter working mode when the recovery is completed.
