East Tester ET-1714, User Manual

Page: 9 / 23

6
seconds as shown in Figure 2.1-3.
Figure 2.1-3
4. Press , enter into output mode selection
5. Press , switch to DC mV output mode. The screen will display as shown in
Figure 2.1-4
Figure 2.1-4
6. Press and to increase or decrease 1 of the horizontal line position (the
number automatic carry but the position of the line have no change); press or
to select a digit to change.
7. Press until the buzzer work to enter 0mV as 0% value.
8. Likewise, press to increase output value to be 100mV, and then press until
the buzzer works and select 100mV as 100% value.
9. Press or to step between 0 and 100% in 25% step increments.
The screen will display as shown in Figure 2.1-5.
Figure 2.1-5