16
1-833-327-8625
9
8
Attach 3 pcs reflector spacers (FF) and 3 pcs washers
(GG) to burner assembly (C) firstly. Tighten the reflector
spacers. Slide 3 pcs washers (GG) over threaded end of
spacer.
Attach the reflector assembly to the top of reflector
spacer (FF) using 3 pcs washers (GG) and 3 pcs wing
nuts (KK).
Place the propane gas tank (sold
separately) on top of the base. The
cylinder must have a listed overfilling
prevention device. All cylinders must
have a listed overfilling prevention
device. The cylinder used must include
a collar to protect the cylinder valve.
Never connect an unregulated propane
cylinder to the heater. Attach the
regulator to the cylinder to complete
attachment.
Fix the gas cylinder with the belt.
Suggestion:
•
While using the heater, fixing the
heater on the ground is better by
fixing pins (not included).
•
Otherwise, assemble a weighted
base (sell separately in the East
Oak heater accessories) at the
bottom.
GG (X9)
KK (X3)
FF (X3)
FF
C
GG
KK
GG
GG
FF
