1
Welcome
This cot is carefully designed for baby’s safety and features an adjustable height
base so you can easily reach baby in the early months and teething rails to protect
the top rails of the sides from sharp teeth.
The cot can be converted to a bed by separating the split end panels and using
the top sections as the headboard and footboard.
The bed is suitable from approximately 18 months to 4 years.
To ensure safe, trouble free use, please take a little time to read the important
safety notes below and the following instructions.
2
Safety notes
Page 1
•
do not place near windows or other furniture.
• Warning: Do not use the child’s cot or bed if any part is broken, torn or missing
and use only spare parts approved by the retailer.
• Warning: Do not leave anything in the cot or place the cot close to another
product, which could provide a foothold or present a danger of suffocation or
strangulation, e.g. strings, blind/curtain cords, etc.
• Warning: Do not use more than one mattress in the cot.
• In cot mode 3 base height positions are possible. The lowest position is the safest
and should always be used as soon as the baby is old enough to sit up.
• The thickness of the mattress shall be such that the internal height (surface of
the mattress to the upper edge of the cot frame) is at least 500 mm in the lowest
position of the cot base and at least 200 mm in the highest position of the cot
base.
• The cot is suitable for a mattress of 1400 mm in length and 700 mm in width, or no
less than a size of 1380 mm x 680 mm. For safe use the mattress thickness should
not exceed 100mm.
•
checked regularly and retightened as necessary.
• To prevent injury from falls, when the child is able to climb out of the cot, the cot
shall no longer be used for that child. The cot should be converted to a bed.
•
• Children are likely to play, bounce, jump and climb on beds, therefore the child’s
bed should not be placed too close to other furniture or windows, blind cords,
curtain pulls or other strings or cords. It should be placed either tight to any wall or
have a gap of 300 mm between the wall and the side of the bed.
• The bed can be carefully dismantled for storage or transportation.
• Designed and manufactured to BS EN 716 : 2017 and BS 8509 : 2008 + A1 : 2011.
