EAST COAST Montreal Quick Start Manual Download Page 2

Small Bolt (24mm) x 4

Please read the instructions and warnings carefully before use to ensure safe and satisfactory 
operation of this product.

Your child’s safety is your responsibility. If you have a query with this product or require replacement 
parts, please contact 01692 408802.

Lay out the parts on a soft level surface and compare to the part/fixing checklist on pages 2 and 3. Do 
not discard any packaging until you are sure that you have all the parts.

Keep children clear during assembly as pack contains small parts which may present a choking 
hazard.

You will need the following tools to complete assembly: 
Flat-headed screwdriver and Cross point screwdriver.

2

IMPORTANT  

RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

Handle x 4

Cam 

Nut

 x 4

Large Bolt (70mm) x 6

Medium Bolt (27mm) x 28

Hexagon key

Dowel x 12

Short Woodscrew x 60

Long Woodscrew x 8

Medium Woodscrew x 12

Hinge  x 6

Cam 

Pin

 x 4

Hardware:

A

B

Before assembling the Wardrobe, 
note that some of the joints use 
Cam pins A, screwed into one part, 
secured by Cam nuts B inserted 
into the large hole in the mating 
part.
The Cam nut is secured by aligning 
the arrow on its surface with the 
Cam pin, inserting into the hole, 
and rotating approximately half a 
turn with a large flat bladed screw-
driver.

Summary of Contents for Montreal













Reviews: