For customer care or enquiries:
Call: 01692 408802
Email: [email protected]
East Coast Nursery Ltd. Robertson House, North Walsham,
Norfolk, NR28 0BX
eastcoastnursery.co.uk
Care and maintenance
In use
All assembly fittings should be tightened properly and should be checked regularly and re-tightened
as necessary. Take care when moving the furniture, as careless handling may cause damage.
Cleaning is simple; just wipe over with a damp cloth, and avoid using strong detergents or abrasives.
An occasional light application of a wax polish will help maintain the finish.
WARNING: YOUR CHILDREN’S SAFETY IS YOUR RESPONSIBILITY
If you leave the child unattended in the cot, always make sure that the dropside is in the raised
position.
The base can be adjusted in height, but the lowest position is the safest and should always be used
in that position as soon as the baby is old enough to sit up.
This product is suitable for a mattress of 1200mm long and 600mm wide.
Check the length and width of the mattress, to ensure the gap between the mattress and the sides
and ends does not exceed 30mm.
The maximum thickness of the mattress is 100mm.
Check the thickness of the mattress, to ensure that the internal height (surface of the mattress to
the upper edge of the cot frame) is at least 500mm in the lowest position of the cot base and at
least 200mm in the highest position of the cot base.
To prevent injury from falls, the cot should no longer be used for the child once they are able to
climb out of the cot.
Warning: Do not use the cot if any part is broken, torn or missing and use only spare parts approved
by the manufacturer.
Warning: Do not leave anything in the cot or place the cot close to another product, which could
cords, etc.
Warning: Do not use more than one mattress in the cot.
Warning: Be aware of the risk of open fires and other sources of strong heat, such as electric bar
fires, gas fires, etc. near the vicinity of the cot.
This product can be dismantled carefully for storage and transportation.
This product has been designed and manufactured to: BS EN 716-1: 2017.
2510
09_17