End Panel
Cot Assembly 1. Fitting the Base.
NOTES:
1. Choose one of the three positions for the base.
If using the high position, insert four bolts into
the upper set of bolt holes. If using the lower
two positions, use only two bolts.
The lowest position is the safest and should
always be used in that position as soon as the
baby is old enough to sit up.
2. If using the top base position, insert the Barrel
nuts into all four holes on the inner faces of
the base rails. (For other positions use UPPER
HOLES ONLY) with the screwdriver slot showing
and ensure that it is aligned with the holes in
the end of the Base side rail.
3. Do not fully tighten bolts at this stage.
4. Retain any unused fittings for future use.
Barrel Nut x 2 (4 in top position)
Bolt x 2 (4 in top position)
Base
End Panel
Cot Assembly 2. Attaching the Side Panels.
Barrel Nut x 2
Side Panel
Bolt x 2
NOTES:
Repeat with second Side Panel
Do not fully tighten bolts at this stage.
Summary of Contents for Hudson
Page 1: ...Hudson Cot Bed...
