EAST COAST Devon Dresser, Manual

Page: 10 / 12

10
Assembly 13
The dresser is supplied with a fixing kit which will secure it and help to guard against accidental tipping.
WARNING : Installation only to be carried out by a competent person.
Check the suitability of the wall before fitting.
1. Place the dresser against the wall where it is to be fitted. Mark the wall at the centre of the upper crossbar.
Move the dresser away.
2. Using the 25mm screw, washer and the appropriate wall fixing attach the fabric strap to the marked position.
3. Replace the dresser and attach the strap to the centre of the rear crossbar using the 15mm screw and the
washer.
Before use, ensure that the strap is securely fixed to both the wall and the dresser.
Washer x 2 Screw (15mm) Screw (25mm)
Plastic wall plug
(for brick and masonry wall use only)
Fabric strap
1 2 3
The type of wall fixing you will require depends on the construction of the wall. See below for details. If in doubt,
seek professional advice.
Wood: If fixing to wood make
sure that it isn’t chipboard as
screws can easily pull away
the core structure. Brick or masonry: Use the
wall plug, provided you are
sure that your wall is sound.
Cavity wall: Special toggle
wall plugs needed.
Seek expert advice.