Power Connection
Figure 3-1
FRONT PANEL INDICATORS
Located on the front panel of the CE-232 are eight (8) LED indicators. The PWR indicator
and TXD, RXD, RTS, CTS, DCD, TXD and RXC which represent the RS-232 control
signals. The control signal indicators act as a break out box in that installation and trouble
shooting are a straight forward process. When properly terminated and with the presence
of DATA, all control signals are active between the two connected CE-232s and the LEDs
illuminated.
DATA PORT CONNECTION
POWER CONNECTION
Before connecting the CE-232s to an AC power source the top cover should be installed
with the supplied #4-40 screws. AC power is supplied to the CE-232s through a 2.3m (6.6
ft) cord terminated by a grounded 3-prong plug. Select an appropriate location accessible
to and within four to five feet of an AC outlet. The AC Power source MUST be grounded or
the CE-232s Warranty will be void.
1 May 2001
EAST COAST DATACOM, INC., 245 Gus Hipp Blvd., STE 3, Rockledge FL 32955
TEL: (321) 637-9922 FAX: (321) 637-9980 www.ecdata.com
CE-232 TECHNICAL INFORMATION GUIDE
MODEM
TERMINAL
RS-232
CE-232
CE-232
USE WITH DTE
USE WITH DCE
CONNECT TO DTE
CONNECT TO DCE
