Easiphone MM910, Instruction Manual

Page: 61 / 67

61
18. Information about SAR
This model fulfils the international guidelines in the scope
of radio waves impact. This device is an emitter and
receiver of radio waves. It is designed so that not to
exceed the limits of radio waves impact, recommended by
international guidelines. These guidelines have been
prepared by independent scientific organization called
ICNIRP taking into account the safety margin in order to
guarantee the protection for all the people regardless of
age and state of health. These guidelines use the unit of
measure called Specific Absorption Rate (SAR)
– specific
absorption coefficient.
The limit value of SAR specified by ICNIRP for portable
devices is 2,0 W/kg. The SAR value is measured at the
highest transmitting power, the actual value during the
operation of the device is usually lower than the
abovementioned level. It results from automatic changes
of device power level in order to ensure that the device
uses only the minimum required for providing the
connection with the network.
Although there cannot be any differences in SAR values
in the case of different models of phones, and even in the
case of different positions of use
– they are all in
compliance with the regulations concerning safe level of
radiation.
World Health Organization stated, that the current
researches indicated that there is no need to use any
special restrictions concerning the use of mobile devices. It
also indicates that in order to reduce the influence of
radiation it is necessary to limit the length of calls or use