2. Locate the removal Slot
3. Inserting the removal tool
Locate the directional arrow on the front face of the alarm, the
removal slot is located directly above the arrow.
TO REMOVE PUSH REMOVE
TOOL INTO SLOT & PUSH
COVER AWAY
Insert the supplied removal tool approx. 1cm into the alarms
removal slot and lever it down gently.
4. Slide the alarm off the mounting plate
With the removal tool still inserted, slide the lower half of the
alarm away from the removal tool in the direction of the arrow
on the cover.
5. Remove the alarm
Remove the alarm from the base by moving it
vertically towards the floor.
Connecting the New Alarm
7. Attach the Alarm
If your alarm is apart of the Ei 140 series of alarms then insert
the 9v battery that is included into the alarm.
6. Insert the Battery (Ei 141, Ei 144, Ei 146)
Place the alarm on the base, slightly offset from the centre and
slide in the opposite direction to the arrow on the cover until it
“clicks” into place.
8. Reconnect the mains power
After the new alarm has been attached to the base plate,
reconnect the mains power supply.
